Kit Features

FLS Microjet Kit Features

1. EVERYTHING INCLUDED – less paint.
2. All-aluminum monocoque construction.
3. Quick build components.
4. Builder Assistance Program (BAP).
5. Primary components (Wings, Flaps, Ailerons, Vertical Stabilizer, Horizontal Stabilator, Rudder, Fuselage, Nose Gear Box, and Main Landing Gear) pre-drilled on aircraft industry hard tooling jigs and fixtures.
6. Machined, welded, and difficult to form parts are supplied.
7. Parts are manufactured to aircraft industry standards.
8. All hardware items and rivets.
9. Fiberglass components.
10. Access, flight control, and powerplant systems openings in airframe are pre-cut.
11. FLS Turbine Structural Airframe Enhancements.
12. Fuselage stretched for safety and improved C.G. control.
13. Formed plexiglass canopy.
14. Hartwell 3 position canopy latch system.
15. Custom cockpit features.
16. Side stick wrist action control (same as modern day fighters).
17. 5-point safety harness system.
18. Adjustable seating (accommodates pilots up to 6’ 2” and 220 lbs.).
19. .032” thickness wing skins with modified leading edge.
20. Detachable wings and control system (15 minutes for assembly or removal).
21. Electrically actuated flaps.
22. Fuselage/wing spar center section with main landing gear pre-assembled.
23. Retractable landing gear (one second cycle time).
24. Microjet High Torque Disc Brakes.
25. Oleo nose strut.
26. Microjet nose gear door.
27. Extended pitot tube.
28. Detachable horizontal stabilator and anti-servo tab.
29. Electrically actuated 2 speed pitch trim.

OPTIONS:

1. Airshow smoke system.
2. Fuselage mounted extended range fuel tank.
3. Integrated 2 axis autopilot.
4. SuperSpar.
5. Upholstery set.

• < Prev
• Next >